The following are some common technical parameters of rotor pump putty paste filling machines:
Filling Capacity
The range is generally wide, ranging from a few milliliters to several hundred liters. The filling capacity of common small rotor pump putty paste filling machines may be between 5 - 5000 ml. For example, the ZS-RPW1 model of ZONESUN has a recommended filling volume of 5 - 5000 ml.
The filling capacity of large putty paste filling machines can reach 200 kg or more. For example, the 200 KG putty filling machine has a filling capacity of 60 - 200 kg.
Filling Accuracy
It is usually required to be relatively high, generally within ±1%. For example, the rotor pump filling machines of models such as ZS-RPW1 and ZS-RPGT900 of ZONESUN have a filling accuracy of ≤ ±1%.
There are also devices with even higher accuracy. For example, the 200 KG putty filling machine has a pouring accuracy of ±0.2%.
Working Speed
It depends on the model and specifications of the equipment. The working speed of small rotor pump putty paste filling machines may be between 10 - 60 bottles per minute. For example, for the ZS-RPGT900 model, taking 250 ml of jam as an example, the working speed is 10 - 60 bottles per minute.
The speed of large filling machines is relatively slow. For example, the 200 KG putty filling machine has a pouring speed of 1 barrel per minute.
Power
The power of small equipment is generally low. For example, the power of the ZS-RPW1 model is 1500w, and the power of the ZS-RPGT900 model is 750w.
The power of large filling machines is relatively high. For example, the power of the 200 KG putty filling machine is 5.5kw.
Air Pressure
Most rotor pump putty paste filling machines require a certain air pressure to assist in their work. The air pressure is generally between 0.4 - 0.6 MPa. For example, the 200 KG putty filling machine of Shanghai Kesu Automation Equipment Co., Ltd. has a compressed air pressure of 0.4 - 0.6 MPa.
Viscosity of Applicable Materials
Rotor pump putty paste filling machines have a strong adaptability to high-viscosity materials. However, the applicable viscosity range of different models of equipment also varies. Generally, it can handle the viscosity range from several thousand centipoises to several hundred thousand centipoises, depending on factors such as the design and rotation speed of the rotor pump.
Material of the Parts in Contact with Materials
To ensure product quality and the hygienic performance of the equipment, the parts in contact with materials usually adopt stainless steel materials, such as 304 stainless steel, 316 stainless steel, etc. Some equipment with higher requirements may adopt higher-level hygienic stainless steel.
Overall Dimensions and Weight
The overall dimensions and weight vary depending on the filling capacity and structure of the equipment. The overall dimensions of small rotor pump putty paste filling machines are generally small. For example, the machine size of the ZS-RPGT900 model is approximately 840×240×640mm, and the weight is about 41kg; while the machine size of the large 200 KG putty filling machine is 2500×1100×1600mm, and the weight is about 200 kilograms.
Diameter of the Inlet Port and Filling Nozzle
The diameter of the inlet port is generally designed according to the fluidity and feeding speed of the materials. Common ones include quick-install rubber hose joints with an outer diameter of 50mm, such as the 200 KG putty filling machine of Shanghai Kesu Automation Equipment Co., Ltd.
The diameter of the filling nozzle also has various specifications, such as pouring nozzles with an outer diameter of 45mm, to adapt to different packaging containers and filling requirements.
